Magnetic Material Vacuum Sintering Furnace

Send Inquiry

Product Introduction

Product description:

Magnetic material vacuum sintering furnace is a high-temperature sintering or heat treatment equipment for magnetic materials, hard alloys, ceramics and other powder materials in a vacuum environment. The equipment must ensure uniform heating, and can realize gradient heating and cooling in an accurate and controllable manner, save energy and reduce consumption, reduce environmental pollution, and the sintering chamber can withstand extremely high temperatures.

The vacuum heat treatment of the magnetic material vacuum sintering furnace can realize almost all heat treatment processes, such as quenching, annealing, tempering, carburizing, and nitriding. In the quenching process, gas quenching, oil quenching, nitrate quenching, water quenching, etc. can also be realized. Vacuum brazing, sintering, surface treatment, etc. can be performed. The vacuum furnace has high thermal efficiency, can realize rapid heating and cooling, can realize no oxidation, no decarburization, no carburization, can remove phosphorus chips on the surface of the workpiece, and has the functions of degreasing and degassing, so as to achieve the effect of brightening and purifying the surface.

The main parameters:

1. Equipment model: FYSJ-5005-10010;

2. Effective heating area: φ50×500mm-φ500×1000;

3. Temperature uniformity: temperature difference ≤10℃;

4. Temperature control accuracy: ±1°C;

5. Maximum operating temperature: 2300°C;

6. Equipment power: 15-1500kw;

7. Ultimate vacuum degree: 5×10-4Pa (molecular pump unit);

5×10-3Pa (diffusion pump group);

5×10-1Pa (Roots pump set);

8. Pressure rise rate: ≤3.33Pa/h;

9. Installation method: vertical or horizontal;