What are the daily operating skills of vacuum sintering furnace
Nov 16, 2022| As for vacuum sintering furnace, vacuum barbecue and gas protection can be carried out. Sintering is mainly applied to the sintering of semiconductor element materials and power rectifier materials. The overall style of this equipment is relatively new, and the structure is relatively compact. It is also convenient to do when exceeding the standard. It is also simpler to carry easily. It can complete many technological processes on one equipment, and can also carry out vacuum heat treatment in other areas. In the process of using this equipment, it is necessary to understand the daily use skills and the skills needed to use it, so that it can be used correctly and safely.
1. Skills required to use time division
Because the vacuum sintering furnace is under the protection of hydrogen after vacuuming, using the principle of induction heating to make the coil produce high temperature, and then conduct it to the operation, which is more suitable for military and scientific research institutions to sinter refractory alloys. Therefore, the operation site should meet the requirements of vacuum hygiene. The surrounding gas should be dry, clean and ventilated. The operation site should not have dust, etc.
2. Understand daily application skills
When the vacuum sintering furnace is used again, check whether the internal accessories are in good condition and fix them on the foundation during installation. Make the correct connection according to the wiring diagram reference schematic diagram, and ensure that the connection is not wrong. The movable part of the vacuum sintering furnace should be checked to ensure that it can move freely without being stuck. The control power switch should be turned off.
After the application skills of vacuum sintering furnace introduced above, do you now know how to use it? When selecting equipment, we should pay more attention to quality issues, and carefully read the instructions after purchase. If there is anything that we don't know about using our thinking, we should communicate with the operators of the manufacturer, so that they can achieve better education and safe use.